Works Cited and Acknowledgements

Works Cited
"Model Rocket Engine." NASA - Title... Web. 09 Dec. 2011. <http://www.grc.nasa.gov/WWW/K-12/rocket/rktengine.html>.
"Flight of a Model Rocket." NASA - Title... Web. 09 Dec. 2011. <http://www.grc.nasa.gov/WWW/K-12/rocket/rktflight.html>.

Photograph. Flight of a Model Rocket. Tom Benson. Web. 22 Nov. 2011.      <http://www.grc.nasa.gov/WWW/K-12/rocket/rktflight.html>.

Acknowledgements

We would like to acknowledge:

Ms. Reese and Mr. Hamilton, for answering our many questions and continuously helping us throughout our project.

Maria Gelabert for letting us use her iPhone to record our rocket's flight!

                       THANK YOU!

Conclusion

1. Comparing Results

1.    When we did the theory calculations to find our rocket's theoretical maximum height, we used the kinematics and free fall equations that Ms. Reese taught us in our science class. In order to figure out the rocket's actual maximum height, we used the triangulation equation; height=50m/tan(15).  We got the number 15, the degree in which the rocket reached its peak height.

2.     It was important to calculate the theoretical maximum height of the rocket because it gave us a reference point to which we could compare the actual peak height the rocket reached in our launch.  It was also useful because it enabled us to estimate how high our rocket would fly.

         B.    Reflection

1.     (see video)- Parachute did not open as expected

2.        Due to the great results of our rocket launch we can conclude that our fin design was well-made. Our rocket flew straight and high, proficiently completed the task it was designed to execute.

3.     In the rocket's first flight, the parachute failed to open and the rocket came crashed to its doom :(. For the second flight the parachute did open because we tied the string more loosely to ensure that it would work.

4.     We would like to experiment with different fin designs.

Rocket Video!

Maximum Height

Using the equations and formulas that we learned in class, we calculated our rocket's theoretical maximum height. This is the work (click to view larger):

As shown above, we got that the peak height would be 105.401 meters.
Then, we calculated the peak height for the actual flight.

The peak height was 186 meters.

Observations:

The rocket's peak height was kind of close to each other in meters.

Completed (designed) Rocket

This is our completed designed rocket.  Today, we did a pre-launch flight test with Ms. Reese to make sure our rocket is flying okay. After spinning it around vertically a few times and making sure that our rocket self-corrects, we came to the conclusion that it was okay.  We didn't have to add extra clay to the white cone.
We checked our observations with the following questions:
1. Are the fins stable?  
          Yes, they are stable.
2. Will the nose cone come off of the rocket body easily?
          Yes, even though we spray painted our rocket, the nose cone still detached easily.
3. When you pull the nose cone off quickly, does the parachute fall out?
          Yes, the parachute fell out when we pulled the nose cone off quickly.
4. Does your engine holder allow engines to be inserted and removed without damage?
          Yes!

This is a scaled picture of our rocket labeled.

Newton's Laws Relating to our Rocket's Motion

Launch to Powered ascent – what is

happening to the rocket? Is its motion changing? How is it changing? Which and how do the laws explain this motion? How is thrust generated? Which law and how does it explain thrust?

Newton's first law is an object in motion and will stay in motion, and an object at rest will stay at rest until acted on by an unbalanced force. Before the launch, the rocket is at rest. Demonstrating Newton’s third law, every action has an equal and opposite reaction. The weight of the rocket is balanced by the reaction of the earth to the weight. When the rocket is launched, Weight and Thrust act upon each other until the thrust becomes greater than the weight, and the net force is positive upward. The rocket then accelerates upward and the velocity increases. Exhibiting Newton’s third law, the exhaust flow is pushed backward, and the engine is pushed forward as a reaction. More specifically, through the combustion of fuel, hot exhaust gas is produced and accelerates at the rear of the rocket. The reaction is the thrusting force on the engine mount.

Coasting flight – why does the rocket

continue to ascend? Which law and how does it explain this?

 During the coasting flight Newton’s third law is in action. The force of weight and the thrust from the engine oppose each other equally, so the rocket continues to ascend. As the weight begins to increase, the forces are unbalanced and negative net force causes the rocket begins to move at a downward slope.

Slow Descent to Landing – what is happening to the rocket? What is responsible for this? Which law and how does it explain this motion?

During the slow descent and landing there is no longer the force of the thrust, so weight pulls the rocket downwards. Air resistance pushes up against the descending rocket but is only strong enough to slow it down a little bit. There is an unbalanced force and a negative net force that acts upon the rocket. Weight continues to act upon the rocket and the parachute opens up and causes more air resistance, slowing the rocket further until it finally reaches the ground.

Once the rocket has landed, it is at rest with no unbalanced forces act upon it. The weight of the rocket pushes down on the ground and the ground pushes back up against it with an equal and opposite force.

Constructing Our Rocket's Fins

Steps:

1) First, we decided on the fin’s shape. We did a little research, looking up different images of rockets to inspire us. Our first thought was to do a simple fin, like a triangle but with a slight hook on the end, but then we decided that it had to look “cooler”.  While applying this to our fin, we kept in mind that the three fins should be professional-looking and efficient.

2) Then, we cut out the fins from a piece of a manila folder, measuring accurately so that all three fins were the exact size.

3) Finally, we attached the fins to our rocket, folding out tabs so that it will be firmly glued on the body tube.  We made sure to glue the fins to the body symmetrically.